Bluetooth Not Working on Hoverboard – Easy Fix Guide

Nov 10, 2025 | by TangJaney

Bluetooth not working on hoverboard can be frustrating, especially when you want to enjoy music or hands-free calls while riding. Many iHoverboard users encounter connection issues due to module faults, low battery, or pairing glitches. This guide will walk you through easy, step-by-step solutions to troubleshoot and fix your hoverboard’s Bluetooth. By following these tips, you can restore seamless connectivity and get back to enjoying your ride.

Why Bluetooth Stops Working on a Hoverboard

If you’ve ever turned on your hoverboard, waited for the familiar Bluetooth connection sound, and heard nothing, you’re not alone. Many riders experience the same issue and wonder why the Bluetooth is not working on their hoverboard. Understanding the most common causes makes troubleshooting much easier and helps you get your iHoverboard connected again quickly.

1. Faulty or Disconnected Bluetooth Module

The Bluetooth module is the small internal component responsible for enabling wireless connectivity between your hoverboard and your phone. Over time, vibrations, minor impacts, or internal wear can loosen its connections or cause it to fail entirely.
If the module is disconnected, damaged, or burnt, your hoverboard won’t show up in your phone’s Bluetooth list at all. In such cases, replacement is often the only solution.

2. Software or Pairing Glitch

Sometimes the problem isn’t hardware-related at all. A simple software glitch in your hoverboard’s control board or a corrupted Bluetooth pairing record on your phone can prevent a proper connection.
If your hoverboard previously connected but now refuses to pair, it’s best to “forget” the device in your phone’s Bluetooth settings, restart both devices, and try pairing again. This often resolves temporary connection issues without any tools required.

3. Low Battery or Power Interruption

Low battery levels can interfere with your hoverboard’s Bluetooth system. When the power drops too low, the module may not receive enough voltage to function properly, leading to weak or failed connections.
Before you start disassembling your board, make sure your iHoverboard is fully charged and that the charger is functioning correctly. A simple recharge might bring your Bluetooth connection back to life.

4. Internal Wiring or Connector Issues

Inside every hoverboard are several wiring harnesses that connect different components — battery, control board, speakers, and Bluetooth module. If any of these cables become loose or disconnected, the Bluetooth system may stop working.
This is more common after a hard bump, fall, or rough transport. Carefully checking internal wiring (if you’re confident doing so) can help identify a loose plug or broken cable that’s disrupting the connection.

5. Interference from Other Devices

Hoverboards communicate via standard Bluetooth frequencies, which can sometimes be affected by nearby devices like wireless headphones, speakers, or even Wi-Fi routers. If you notice your hoverboard Bluetooth not working in busy or crowded environments, try connecting in a quiet area away from other signals.
Turning off nearby Bluetooth devices temporarily can also help reduce interference and make pairing smoother.

6. Outdated or Incompatible Device Settings

Occasionally, the issue lies with the smartphone or tablet itself. Older operating systems, restricted app permissions, or devices running in “power-saving mode” can limit Bluetooth performance.
Ensure your phone’s software is updated and that the Bluetooth feature is fully enabled. For best results, pair your iHoverboard using a device that’s compatible with standard Bluetooth 4.0 or higher.

7. Water or Moisture Damage

Although most hoverboards, including iHoverboard models, are designed to handle light splashes, exposure to water or heavy moisture can damage electronic components, including the Bluetooth module. If your hoverboard has recently been used in damp conditions or stored in a humid environment, moisture may have caused corrosion on internal connectors, resulting in Bluetooth failure. Allowing the device to dry completely or seeking professional inspection may be necessary.

Step-by-Step Fix for Bluetooth Not Working on Hoverboard

If your Bluetooth is not working on your hoverboard, don’t worry — in most cases, the issue can be fixed at home with a few straightforward checks. The following step-by-step guide is designed for iHoverboard riders who want to restore Bluetooth functionality without professional help. These steps take about 30–45 minutes and require only basic tools.

Step 1: Check Your Device’s Bluetooth Settings

Before opening your hoverboard, make sure the problem isn’t with your phone, tablet, or the Bluetooth device you’re trying to connect.

Turn Bluetooth off and on again on your phone or device.
Ensure the device is discoverable, meaning other Bluetooth devices can detect it.
Remove previous pairings — go to your phone’s Bluetooth list, find your hoverboard name (usually “Bluetooth” or “iHoverboard”), and select Forget Device.
Test with another Bluetooth device (like headphones or a speaker) to confirm your phone’s Bluetooth is functioning properly.

If your phone connects to other devices successfully, but not to your hoverboard, the issue is likely within the hoverboard itself.

Tip: Make sure your hoverboard is powered on when trying to connect. If you don’t see it appear in your Bluetooth list, continue to the next step.

Step 2: Reset Your Hoverboard

A quick reset can often resolve Bluetooth connection errors caused by minor software glitches.

Here’s how to reset your iHoverboard:

Turn off your hoverboard completely.
Make sure it’s not plugged into the charger.
Press and hold the power button for about 10 seconds.
Release the button and wait a few seconds for the internal systems to reset.
Turn the hoverboard back on and try reconnecting your phone via Bluetooth.

After resetting, the Bluetooth system should reinitialise. If the connection still doesn’t appear, proceed to the next step.

Step 3: Access the Bluetooth Module Inside the Hoverboard

If a reset doesn’t fix the issue, it’s time to check the Bluetooth hardware.
You’ll need a Phillips screwdriver to remove the bottom casing of your hoverboard.

Turn off and unplug your hoverboard for safety.
Flip the board over so the wheels are facing upwards.
Use the screwdriver to remove all screws securing the bottom cover. Keep the screws safely aside.
Carefully lift the cover — avoid pulling or bending any wires connected to the casing.

Once open, you’ll see several components, including the battery, control board, speakers, and Bluetooth module. The module is usually a small rectangular unit with an attached antenna or wire.

Step 4: Inspect the Bluetooth Module

The Bluetooth module is the “brain” behind your hoverboard’s wireless connectivity. A faulty or loose connection here is one of the main reasons for Bluetooth not working on a hoverboard.

When inspecting the module:

Check for visible damage — such as burnt areas, cracked components, or discolouration.
Look for loose cables or connectors — make sure every wire is properly seated and plugged in.
If you have a multimeter, measure the module’s voltage (refer to your hoverboard’s manual for voltage range). If the reading is far below the recommended level, the module may be failing.
Gently clean any dust or debris using a dry cloth or compressed air.

If the module looks intact and properly connected, try reassembling your hoverboard and testing Bluetooth again. If the connection still fails, move to the next step.

Step 5: Replace the Bluetooth Module (If Necessary)

If you’ve confirmed that your Bluetooth module is faulty, replacing it is the final step.
This part can usually be ordered directly from iHoverboard to ensure compatibility and performance.

To replace the Bluetooth module:

Disconnect the wiring connectors attached to the existing module.
Remove the screws or clips securing it in place.
Take out the damaged module carefully.
Position the new module in the same spot, ensuring all cables align properly.
Reconnect the wiring firmly — double-check that each connector clicks securely into place.
Reattach the module using its original screws or mounts.

Once installed, reassemble the hoverboard by putting the bottom cover back on and securing the screws. Turn it on and try pairing your phone again via Bluetooth.

If the hoverboard’s Bluetooth name appears in your device list and connects successfully, the issue has been fixed.

Step 6: Test the Connection

After completing the steps above:

Turn on your iHoverboard and open the Bluetooth settings on your phone.
Wait for the hoverboard’s Bluetooth name to appear in the device list.
Select it to pair — you should hear a confirmation sound or see an indicator light once connected.
Try playing music or a sound to confirm that the speakers are working properly.

If the connection works as expected, your repair is complete. If not, repeat the steps to ensure all connections are secure or contact iHoverboard support for professional assistance.

Final Tip

When Bluetooth is not working on your hoverboard, avoid repeated forced pairings or using third-party apps. Sticking to the official pairing process helps prevent software conflicts and ensures your iHoverboard’s systems stay protected.

Test and Confirm the Fix

After following the troubleshooting or replacement steps, it’s time to make sure that your repair has actually solved the problem. Testing the Bluetooth connection carefully ensures that your iHoverboard is functioning correctly before your next ride. This section will guide you through how to confirm your hoverboard’s Bluetooth system is working and what to do if the issue still persists.

1. Power On and Prepare for Pairing

Before testing, double-check that your hoverboard is fully reassembled and all screws are secured in place. Then:

Place your hoverboard on a flat surface and make sure it’s switched off.
Press the power button to turn it on — you should hear the usual start-up sound.
Wait a few seconds for the Bluetooth indicator light or tone (depending on your iHoverboard model) to activate.

If you don’t hear any sound or see a Bluetooth light, it may suggest the module isn’t powered or connected properly.

2. Enable Bluetooth on Your Phone or Device

On your smartphone, open the Bluetooth settings menu.
Turn Bluetooth on and wait for your phone to scan for nearby devices.
Look for the hoverboard’s name in the list — it usually appears as “iHoverboard”, “Bluetooth”, or the model name.
Select it to begin pairing.

If the connection is successful, your phone will show “Connected,” and you’ll often hear a short tone from the hoverboard’s speakers confirming the link.

3. Test Sound and Connectivity

Now that the hoverboard and phone are connected, it’s time to confirm that audio and control functions work properly:

Play a song or short video on your device. The sound should automatically come through the hoverboard’s built-in speakers.
Adjust the volume from your phone to check responsiveness.
Move the hoverboard slightly while connected — if the music continues to play clearly without interruption, the Bluetooth signal is stable.

If you hear distortion, crackling, or disconnection, try moving your phone closer to the hoverboard and retesting.

Tip: Bluetooth range on most iHoverboard models is around 5–10 metres. Staying within this range provides the best performance.

4. Check Connection Stability

Stable Bluetooth connectivity is a strong sign that your fix worked correctly. To confirm reliability:

Turn off the hoverboard and wait a few seconds.
Turn it back on and check if it automatically reconnects to your phone.
Repeat this a few times — a consistent automatic reconnection means the module and software are communicating correctly.

If you have to manually reconnect every time, it might be a sign of a weak Bluetooth signal or an issue with your phone’s Bluetooth cache. Try clearing the cache or re-pairing the devices once more.

5. Confirm Module Performance (Optional Advanced Check)

For those comfortable with light technical checks, you can perform a quick performance test on the module:

Use a multimeter to ensure the Bluetooth module is receiving power when the hoverboard is turned on (typically within the 3.3V–5V range, depending on your model).
Observe whether the Bluetooth indicator LED (if visible) blinks consistently when connected — irregular blinking might indicate unstable wiring or partial connectivity.

While these checks aren’t essential for every user, they’re a good way to ensure your iHoverboard’s internal systems are fully operational after the repair.

6. Final Reconnection Test

Once everything seems to be working:

Unpair and then re-pair your hoverboard one final time to confirm the new module or repaired system is properly recognised.
Test with a different smartphone or Bluetooth-enabled device to confirm that the problem isn’t device-specific.
Play audio again and move a few metres away to test Bluetooth signal range.

A strong, uninterrupted sound confirms your Bluetooth not working on hoverboard issue has been successfully fixed.

7. Document the Repair (Optional)

It’s a good idea to note the date of your repair and what you replaced or checked. This helps if you ever experience similar problems again. Keeping track of part replacements, such as a new Bluetooth module, ensures better maintenance and warranty communication with iHoverboard support in the future.

When to Contact iHoverboard Support

If you’ve followed all the steps and the Bluetooth is still not working on your hoverboard, it may be time to reach out to iHoverboard Support for professional help. Some Bluetooth issues require specialist tools or part replacements that can only be done safely by the manufacturer.

1. Persistent Connection Problems

When your hoverboard still doesn’t appear on your phone’s Bluetooth list or keeps disconnecting even after resetting and checking the module, the fault may lie in the main control board or internal wiring. iHoverboard technicians can quickly test and replace these components using genuine parts.

2. No Sound or Weak Audio

If your phone connects but there’s no sound from the speakers, the issue could be a damaged speaker cable or faulty audio circuit. Support can confirm which part needs replacing without risking further damage.

3. Visible or Electrical Damage

Stop using your hoverboard if you notice a burnt smell, melted wiring, or moisture inside. These signs suggest a short circuit that should only be handled by iHoverboard’s authorised repair team.

4. Under Warranty or Firmware Issues

If your hoverboard is still under warranty or may need a firmware update, contact iHoverboard first. Attempting complex repairs yourself could void the warranty. Their support team can guide you through safe troubleshooting or arrange a repair or replacement.

How to Reach iHoverboard Support

You can easily contact the team through the official iHoverboard website via the email support@ihoverboard.com or Contact Us page. Provide your model number, a short description of the Bluetooth issue, and photos or videos if available. A technician will advise the best solution or arrange a repair.

Conclusion

Bluetooth issues on your hoverboard can be frustrating, but most problems can be resolved with simple troubleshooting. By checking your device settings, resetting your hoverboard, inspecting or replacing the Bluetooth module, and testing the connection, you can quickly get your iHoverboard’s Bluetooth system working again.

If the problem persists despite following these steps, contacting iHoverboard Support ensures a safe, professional repair using genuine parts. With proper maintenance and care, your hoverboard will continue to provide seamless Bluetooth connectivity for music, calls, and a better riding experience.

FAQs

Why isn’t my hoverboard connecting to Bluetooth?

If your hoverboard isn’t connecting to Bluetooth, the most common reasons are a faulty Bluetooth module, low battery, or a pairing glitch on your phone. Start by fully charging your hoverboard and ensuring Bluetooth is turned on and discoverable on your device. If it still won’t connect, reset the hoverboard and try pairing again. In some cases, you may need to replace the Bluetooth module to restore full connectivity.

How to reset hoverboard Bluetooth?

To reset your hoverboard’s Bluetooth system, follow these steps:

Turn off your hoverboard completely.
Make sure it’s unplugged from the charger.
Press and hold the power button for about 10 seconds until you hear a beep or see flashing lights.
Release the button and wait a few seconds.
Turn the hoverboard back on and reconnect your device via Bluetooth.

This process refreshes the internal system and often fixes issues where Bluetooth is not working on your hoverboard.

How do I fix “Bluetooth failed to connect”?

When your hoverboard shows a “Bluetooth failed to connect” message, it usually means there’s a temporary pairing issue. Try the following:

Delete the hoverboard from your phone’s Bluetooth list and restart both devices.
Reset your hoverboard.
Reconnect once it restarts and shows its Bluetooth signal again.
If the error persists, inspect or replace the Bluetooth module.